A kitchen is always complete if it has a perfect cutting board. Only a few pieces of kitchen equipment are as elementally essential as a cutting board. Not all cutting boards are created equal. Plastic boards, for example, are an economical and durable pick. Granite, glass, and other stone-made boards aren’t great for daily use. wood cutting boards are the most classic and widely-used type of board because they’re both practical and aesthetically pleasing. A quality wood cutting board can be an essential, beautiful centerpiece in your kitchen. There are other better materials like MDF, Plywood, Let’s have a look at types of cutting boards.
Types of materials used for Cutting Boards
Wood is a renewable resource, although not nearly as easily renewable as bamboo. And many boards are actually made from waste wood (i.e., leftovers at the mill that would have been otherwise thrown away). What’s more, a heavy softwood board is kind to knives and will keep them sharper longer. And finally, a good maple or beech cutting board is somewhat self-healing, and won’t scar as easily as a plastic board.
Bamboo is the choice of many environmentalists. A hard grass, it is a sustainable, renewable resource that needs no chemicals to thrive or be harvested. And, because bamboo boards absorb less liquid than wooden boards, many believe they are at least as sanitary as wooden boards. Bamboo is 19 % harder than traditional maple, which means it’s also harder on your knives. Also, the small grooves may ever-so-slightly catch your knife, interrupting a smooth cutting action.
The most widely used type of cutting block is definitely the plastic one. They are made from polyethylene. Plastic cutting boards dull your blade faster than wood or bamboo types. Therefore, it is a big disadvantage for these types.
Moreover, the plastic board doesn’t look as attractive due to the accumulation of hundreds of marks. They also harbor bacteria but it’s minimal. This includes nasty microscopic things that will wreak havoc on your gut once ingested.
Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibers, often in a defibrillator, combining it with wax and a resin binder, and forming it into panels by applying high temperature and pressure.. When it comes to engineered wood, MDF is often considered a level above the plywood. It is denser, stronger, and more durable. MDF cutting boards are superior for their hard-wearing and self-healing properties, and their ability to preserve a knife-edge.
These are the most beautiful boards. On the other hand, the glass isn’t the most practical for everyday use. The plus is that the glass cutting trays are nonporous and easy to clean. They can be washed in a sink or dishwasher. Glass cutting boards have the hardest and heaviest surface. But, they are the worst board for your knives. They dull the knife very fast and the surface is quite slick. Therefore, you should be very careful while using it. Most people use this board for serving instead of cutting. Glass cutting blocks are fragile and potentially dangerous.
How to install cutting boards?
Let’s analyze the steps in installing a cutting board
- Select a location for the cutting board over one of the top drawers. Choose a drawer 12 to 16 inches wide, if possible.
- Cut out the section of wood or similar materials directly above the drawer, using a hacksaw
- Make the exact measurements and start the fitting using it
- Drill one hole in the ends of the slides, one inch inward from the ends, centered on the sides.
- Insert the poplar slides into the opening. They might fit tightly. Tap them into place with a hammer, if necessary.
- Apply glue on the boards to stick in properly
- Sand the hardwood end of the fiber core cutting board smooth and round by hand, using 100-grit sandpaper.
Tips for Making a Great Cutting Board
- Selecting the perfect material: Every project starts with material selection and this is no different, but perhaps you need to be a bit pickier. Select the material that suits you better, whether it could be Plywood, MDF, or wood.
- Prepare the Cutting Board Parts
- Cut the thin Strips Without a Jig
- Gett Nice Glue Joints
- Assembling the Cutting Board
- Cleaning Up the Cutting Board
- Square Up the Cutting Board
- Add Bevels As a Feature
- Sanding the Cutting Board
- Raising the Grain
- Apply Finish to the Cutting Board
If you are looking for a perfect cutting board always choose from better manufacturers. If you find MDF cutting boards useful, choose it or if you need a wooden cutting board or plywood cutting board you can choose that also. Cut and edge bring to you a perfect range of cut to size MDF, plywood, and wood that could be perfect for your daily uses.